As
a rule of thumb, when starting a fire in a cold stove, the
combustor must have 500 o F. of temperature focused on it for
20 to 30 minutes to achieve proper light-off.
The by-pass should be in the open position during
this period of time.
This will allow the stove, the catalytic combustor
and the fuel to stabilize at a proper operating temperature.
Even though temperature can reach 600 o
F. within a few minutes after the fire has started, if the fire is turned down
too soon to a low burning condition, it will result in the fire and/or the
catalytic combustor going out.
At the end of a burn cycle, it’s possible that the
amount of burning charcoal remaining might not provide sufficient temperature
or fuel for the catalyst to stay lit.
During the refueling stage, if the stove’s firebox
has an internal temperature below
500 o F., it is best to fire the stove up
for 10 to 15 minutes.
This will provide increased temperature and proper
amounts of volatile gases for the catalyst to operate efficiently.
However, when refueling a hot stove that has an
internal temperature above 500 o F., no re-firing is necessary.
Refer to the manufacturer's stove operating manual
for complete details.
No comments:
Post a Comment